LG WebOs 6

Download Admira WebOs 6 Player

Factory Reset

If the screen is new and has not been used previously or the Factory Reset has already been performed, we will go to point 2. Otherwise, we will perform the Factory Reset.

It is advisable to consult with Support / QA to verify that the device's default firmware is validated. We share the firmware validated on screens with incompatibilities found in their default firmware.

• 43/49/55/65UH5N, 43/49/55/65UM5N - Firmware USB: https://signup.lge.com/Update/Customer_temp/CDTechSupport/FW/lib32-signage-flash-m16p3-330.lager.m16p3-83-08.68.20_prodkey_usb_V3_SECURED.epk

• New firmwares for WebOS 6 models:

  6.0
    6.epk
    UL3J
      SM5J_UL3J_03.08.40.epk  
      SM5J_UL3J_UH5J_UH7J_03.24.90.epk
    SM5J
      03.68.33.epk
    UH5J
      03.68.33.epk
    UH5N
      03.68.33.epk
    UH7J
      03.68.33.epk
    UH7N
      03.68.33.epk
    UL3J
      03.68.33.epk
    UM5K
      03.68.33.epk
    UM5N
      03.68.33.epk
    US5P
      03.68.33.epk
      
      Download URL: http://install.admira.com/firmwares/webos/6.0/....
      Complete the URL with the correct model according to the previous list 
      
      ej: Model UM5N
      Full URL for this model:
      http://install.admira.com/firmwares/webos/6.0/UM5N/03.68.33.epk

How to do a Factory Reset

Administrator > Reset to factory settings

1. We access the menu, Administrator > Restore factory settings. A cancel and confirm message will appear, and once confirmed the screen will turn off

2. Turn on the screen

Server Configuration / Player Admira Installation

1. Once the screen is turned on, we configure Language and country and time zone selection

2. We skip the Rotation = Off configuration step

3. We Configure the Network Settings, in the Internet Connection Type option select Wired (Preferably) or WIFI = Accept

4. Skip the On/Off Timer setting step

5. To install Admira we go to Menu > Quick Configuration > Server Configuration YES

6. Next, the WebOS configuration window will appear. We will configure the following options: Application launch Mode: Local Fully Qualified Domain Name: Switched on In the address bar: http://install.admira.com/webos/2025 Application type: IPK Local Application upgrade: Remote (The screen must be connected to the Internet, otherwise an error will appear). Actualización automática: Off

SI Server Configuration

SI Server Configuration Panel

Settings and configuration

Once configured, we reset the screen by turning it off and on.

It is important to note the power settings. We must leave the configuration exactly the same as the one shown in the image

Restart after power failure: PWR (On)

As a general rule, the orientation of the screen is recommended to be kept off, but we can set it to vertical according to the client's request.

Display

Rotation

It is advisable to use the time manually at all times and not automatically.

Time & date

Security

In WebOs 6 the default security code is 0 0 0 0 0 0. This can be modified to the desired one in the Administrator > Change Password menu.

It is recommended to block the IR in the menu Administrator > Access Lock > Block IR and select: On only. This way the remote control will only respond to the power button.

To unlock the remote control, simply press the menu button continuously for 8 seconds and it will ask for the unlock code.